Moving Heavy Or Oversized Equipment For Your Business Needs

The business you are in, often dictates what you may or may not need for equipment in your shop. When you work with large pieces of machinery, getting it moved to your location and set up in the shop can be difficult. The loading and unloading, the transportation, and the installation all have to be executed perfectly so that the machinery is not damaged and no one gets hurt in the process.

Transportation Of Your Machinery

When you are buying a large piece of machinery that is going to be used in your business, getting it back to the shop is not as easy as strapping it to the roof of your car or throwing into the back of a pickup truck. Often you will need a truck that is specifically set up to haul these large and heavy loads. Contracting a company to haul the load involves finding one with experience moving large equipment and depending on how large the machine is, it could involve permits for the weight and size of the load. Be sure to check for yourself because if you are required to have specific permits and you don't get them, the fines can be a lot more costly in the end. The driver hauling the load should know if a permit and escort car are required but if you check with the department of transportation yourself, there will be no doubt that you have what you need.

Rigging the load

While the trucking company will know the laws about the transportation of the load, they may not offer any loading service and with really large or very heavy items, a rigger should be used to load and unload the equipment. A rigger is someone who understands how to properly move items that weigh a lot or are very large. They will often use cranes, specialized roller assemblies, and tools that make it possible to move things that are just too large to move by hand. A good rigger can determine the best way to move the machinery and will often bring a specialized crew with them to get your machine on or off the truck and into place without damage to the machine or injury to anyone working around it. Rigging crews are hired separately from the transport company but are important if you are moving large, oversized items.

Don't Forget The Installation

Once your equipment is on site, you will need to have people there to get it setup and running. A commercial electrician may need to be there to connect the wiring to the machine, a commercial plumber might be required if there are cooling lines or a drain that needs to be connected, and a representative from the company that sold the machine may be needed to show you how everything works and train your employees on proper use of the equipment might be a good idea. The whole process can take days or even weeks to coordinate but working with professionals to safely move your equipment will make it worth it in the end.

Visit a site like http://www.cookcraneservicemedford.com/ for more help.


Share